Dimmable 30W 110V Led Downlight Recessed Ceiling Lighting Fixture
 
Quick Detail:
 
Cut Out : 220mm
Certification : CE / ROHS 
Body material : Aluminum
Dimmable : Available 110V/220V
CRI : 70RA
Power : 30W
Voltage : AC85-265V 
Chips Brand : Epistar 
LED : COB LED
Size : 8inch
 
 
30W COB Recessed LED Downlight Features:
 
1) . White head made of fire-proof material and black body made of aluminum.
2) . The middle of High transmittance glass is frosted, to avoid glare  and dazzling.
3) . Reflective cup with good focusing effect , emitting angle is 120 degree. 
4) . The COB led made of epistar chips.Efficiency is 80-90LM/ W 
5) . Input 85-265V, Adopt series circuit,with  function of automatic protection circuit. 
6) . The cob downlight pass CE, ROHS, FCC, SAA, C-Tick. 
 
COB Advangage
 
1) Heat dissipation :  Fast Cooling speed , Reduced space requirements, 
2) Production process : Higher reliability due to better heat distribution and a lower number of solder joints;
3) Optimized thermal management : Heat distributed across a larger surface for immediate dissipation, 
with lower junction temperature, which brings improved Lumen Maintenance over product lifespan.
 
 
30W COB Recessed LED Downlight Specification
 

 
 
30W COB Parameter
 

	COB Power	30w
	PCB Material	PCB Material
	Chips Brand	Epistar 28*14mil
	Chips Quantity	150PCS
	Color Rendering Index	>70
	Output Voltage	30-33VDC
	Current	900MA

 
 
30W Driver Parameter

	Input Voltage	AC85-265V
	Output Voltage	30-42VDC
	Input Current	0.17-0.5A
	Output Current	900MA
	Power Factor	>0.9
	Certification	CE / ROHS / SAA / ETL
	Dimmable	Triac / 0-10V

 

 
Approximate Comparison Chart
 

 
 
30W COB Recessed LED Downlight Dimension
 

 
 
30W COB Recessed LED Downlight Packing
 
 

 

 
 
Inatallation instructions Recessed LED Downlights
1. Switch off the power.
2. Ensure that the void depth is a minimum of 90mm, the thickness of ceiling is a maximum of 20mm.
3. Cut a hole using an appropriate tool according to the cut-out.
4. Connect the wire of the driver to mains(85-265v)in a correct way,put the driver into the ceiling properly.
5. Push the spring clips upwards and fit into ceiling hole, ensure the product is sitting properly in hole.
6. Screw lighting engine as shown in figure 5 and 6, and install reflector and frame.
7. Switch on the power if above steps done properly without any mistakes.