20W COB LED Downlight  professional COB led lamps manufacturer cut out 170mm

Features:

1. Design inspiration comes from the tyres for Porsche Cayenne. 
2. White outer ring with black body appears very high-grade.

3. The middle of High transmittance glass is frosted, to avoid glare.

4. The COB led made of 0.2w epistar chips 100-110LM/ W,Ra>70. 
5. Reflective cup with good focusing effect , emitting angle is 120 degree. 
6. Driver adopt series circuit,with function of automatic protection circuit.
7. Non-Dimmable or Dimmable, Dimming Type Triac and 0-10V.

8. High quality with CE, Rohs certificates, 3 years warranty

9. Life span: 50,000 hours

Specification

Dimension

Packing

	Model	SP-COB-XN-20W
	Net Weight	0.8KG
	Inner box size	26x22x9CM
	Outter carton size	55x45x51CM
	Carton G.w	25KGS
	Pcs/carton	20PCS / CTN

Inatallation instructions Recessed LED Downlights

1. Switch off the power.
2. Ensure that the void depth is a minimum of 90mm, the thickness of ceiling is a maximum of 20mm.
3. Cut a hole using an appropriate tool according to the cut-out.
4. Connect the wire of the driver to mains(85-265v)in a correct way,put the driver into the ceiling properly.
5. Push the spring clips upwards and fit into ceiling hole, ensure the product is sitting properly in hole.
6. Screw lighting engine as shown in figure 5 and 6, and install reflector and frame.
7. Switch on the power if above steps done properly without any mistakes.