Dimmable Recessed led downlight 4inch cob ceiling light 10W CE&ROHS
 
 
Quick Detail:
 
1 . high brightness 
2 . energy saving
3 . Aluminum + Glass
4 . IP44
5 . voltage: AC85-265V
 
10W COB Recessed LED Downlight Features:
 
1. Design inspiration comes from the tyres for Porsche Cayenne. 
2. White outer ring with black body appears very high-grade.
3. The middle of High transmittance glass is frosted, to avoid glare.
4. The COB led made of 0.2w epistar chips 90-100LM/ W, Ra>80. 
5. Reflective cup with good focusing effect , emitting angle is 120 degree. 
6. Driver adopt series circuit,with function of automatic protection circuit.
7. Non-Dimmable or Dimmable, Dimming Type Triac and 0-10V.
8. High quality with CE, Rohs certificates, 3 years warranty
9. Life span: 50,000 hours
 
 
15W COB Recessed LED Downlight Specification
 

 
 
15W COB Parameter
 

	COB Power	15w
	PCB Material	PCB Material / Ceramics
	Chips Brand	Epistar 28*14mil
	Chips Quantity	75PCS
	Color Rendering Index	>80
	Output Voltage	45-48VDC
	Current	320MA

 
 
30W Driver Parameter

	Input Voltage	AC85-265V
	Output Voltage	30-60VDC
	Input Current	0.23A
	Output Current	300MA
	Power Factor	>0.9
	Certification	CE / ROHS / SAA / ETL
	Dimmable	Triac / 0-10V

 

 
Approximate Comparison Chart
 

 
 
30W COB Recessed LED Downlight Dimension
 

 
30W COB Recessed LED Downlight Packing
 

 

 
Inatallation instructions Recessed LED Downlights
1. Switch off the power.
2. Ensure that the void depth is a minimum of 90mm, the thickness of ceiling is a maximum of 20mm.
3. Cut a hole using an appropriate tool according to the cut-out.
4. Connect the wire of the driver to mains(85-265v)in a correct way,put the driver into the ceiling properly.
5. Push the spring clips upwards and fit into ceiling hole, ensure the product is sitting properly in hole.
6. Screw lighting engine as shown in figure 5 and 6, and install reflector and frame.
7. Switch on the power if above steps done properly without any mistakes.